Renolin Unisyn CLP 220 | 320 | 460

Product Description

These are fully-synthetic industrial gear oils with elevated aging resistance, excellent load-carrying capacity and wear protection. RENOLIN UNISYN CLP oils have good resistance to micropitting. Reliable lubrication of roller bearings is confirmed by the good results of the FE8 testing. The products are preferably used when increased requirements are set for high and low temperature usage limits. In gearboxes and circulating systems with sump temperatures up to 90ºC, longer oil-change intervals in comparison with previous mineral oils are achieved.

Miscibility with gearbox oils based on mineral oil is generally given, which means that simplified conversion is possible.

 

The oils of the RENOLIN UNISYN CLP series are used for all applications in industry where a synthetic oil of the CLP type according to DIN 51517-3 is recommended by the manufacturer. Highly-stressed bearings, joints, pressure screws, spur gears and worm gears can be reliably, safely and economically supplied even at short-term peak temperatures up to 150ºC.

 

- Low foaming

- Good air release capacity

- Very good aging resistance

- Excellent corrosion protection

- Excellent viscosity-temperature behaviour

- High natural VI (viscosity index)

- Multigrade character

- Excellent wear protection, high EP performance

- Miscible with mineral oil- and ester-based gear oils

- Lifetime lubrication possible

- For high and low operating temperatures

 

The products meet and in many cases exceed the requirements according to:

- DIN 51517-3: CLP

- ISO 6743-6 and ISO 12925-1: CKC / CKD / CKE

- AGMA 9005/E02: EP

- AIST 224

- David Brown S1 53.101

- FAG requirements: FAG-FE8-Test: stage 1-4 pass (test report is available for ISO VG 320)

- SKF requirements: pass (100ºC-test)

 

The RENOLIN UNISYN CLP series are approved for example by Siemens-Flender AG, Bocholt.

Typical Properties

TYPICAL PROPERTIES	UNIT	FUCHS RENOLIN UNISYN CLP				TEST METHOD
ISO VG	-	68	100	150	220	DIN 51 519
Kinematic viscosity at 40°C	mm2/s	68	100	150	220	DIN EN ISO 3104
at 100°C	mm2/s	10.7	14.5	19.6	26.7
Viscosity index	-	147	150	150	155	DIN ISO 2909
Density at 15°C	kg/ m3	848	851	853	854	DIN 51 757
Colour	ASTM	0.5			1.0	DIN ISO 2049
Flashpoint, Cleveland oopen cup	°C	240	250		260	DIN ISO 2592
Pourpoint	°C	-56	-53	-45	-42	DIN ISO 3016
Neutralization number	mgKOH/g	0.6				DIN 51 558-1
Scuffing and scoring test, FZG A/8.3/90	Failure load stage	>12				DIN ISO 14635-1
Scuffing and scoring test, FZG A/16.6/140		12
Micropitting test, FZG-GFT test GT-C/8.3/90 °C Load stage test/ endurance test	GF class	GFT high				FVA-information sheet no. 54/I-IV
Micropitting test, FZG-GFT test GT-C/8.3/60 °C Load stage test/ endurance test		GFT high
FE-8 roller bearing test, 7.5/80/80 and 7.5/100/80		Pass (excellent)				DIN 51 819-3

 

TYPICAL PROPERTIES	UNIT	FUCHS RENOLIN UNISYN CLP				TEST METHOD
ISO VG	-	320	460	680	1000	DIN 51 519
Kinematic viscosity at 40°C	mm2/s	320	460	680	1000	DIN EN ISO 3104
at 100°C	mm2/s	35.0	45.6	62.2	84.0
Viscosity index	-	155		160	165	DIN ISO 2909
Density at 15°C	kg/ m3	860	861	862	864	DIN 51 757
Colour	ASTM	1.0				DIN ISO 2049
Flashpoint, Cleveland oopen cup	°C	260	300			DIN ISO 2592
Pourpoint	°C	-42	-39	-33	-27	DIN ISO 3016
Neutralization number	mgKOH/g	0.6			0.55	DIN 51 558
Scuffing and scoring test, FZG A/8.3/90	Failure load stage	>14				DIN ISO 14635-1
Scuffing and scoring test, FZG A/16.6/140		>12
Micropitting test, FZG-GFT test GT-C/8.3/90 °C Load stage test/ endurance test	GF class	GFT high				FVA-information sheet no. 54/I-IV
Micropitting test, FZG-GFT test GT-C/8.3/60 °C Load stage test/ endurance test		GFT high
FE-8 roller bearing test, 7.5/80/80 and 7.5/100/80		Pass (excellent)				DIN 51 819-3

Contact our sales consultant in area: 
Malaysia, Selangor (Klang, Puchong, Shah Alam, Subang), Kuala Lumpur (Sungai Buloh), Negeri Sembilan (Seremban), Melaka, Johor (Johor Bharu, Muar, Batu Pahat), Pahang (Temerloh, Kuantan), Kelantan (Kota Bahru), Terengganu (Kuala Terengganu), Perak (Ipoh), Kedah (Sungai Petani), Perlis, Penang (Bukit Mertajam, Butterworth, Seberang Prai), Sabah (Kota Kinabalu), Sarawak (Kuching), WP Putrajaya, WP Labuan, Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei